Ricoh AFICIO AP306 Setup Manual page 183

10. Parallel 2
You can select the optional parallel interface timing setting. Normally it is not
necessary to change this setting.
• ACK Inside
• ACK Outside
• STB Down
Note
Do not use the "ACK Outside" setting.
11. Bi-direction
You can select the printer response mode for status fetch requests when the
standard parallel interface is being used. Use the "Standard" setting when you
are experiencing problems while the printer is connected to another manufac-
turer's print box.
• Original Mode
• Standard
Note
This setting is effective only for "Parallel 1".
12. OHP Slip
OHP Slip is a sheet of paper placed between printed OHP transparencies. You
can turn this function off and on. For more information, see P.83 "Using the
Operation Panel".
• On
• Off
13. PrinterLang.
You can select the printer language that is automatically set when the printer
is turned on.
• IPDL-C
• RPS
14. Language
You can select the language of the text that appears on the panel display.
• English
• French
• German
• Italian
• Dutch
• Spanish
• Japanese
Menu Settings
Draft 2000/06/22
5
97