Ricoh AFICIO AP306 Setup Manual page 250

Using RICOH-SCRIPT2 with a Macintosh
• Color Profile
Use this to select a color rendering dictionary (CRD). The CRD is referred
to for color matching, so you should select the appropriate CRD for the
document you are printing. The CRD you select is also referred to when
[Fine] or [Super Fine] is selected for "Color Setting". The following items are
available: [Photograph]
Note
2
When selecting [OHP Transparency] as the paper type, the CRD automat-
ically adjusts to a color profile specifically for OHP. Even though the
color profile has been optimized for OHP, the adjustments are automat-
ic and are not indicated on any of the dialog boxes. In this case, this set-
ting is not enabled.
*1
Use this setting to enhance the reproduction of photos and graphics that in-
clude midtones.
*2
Use this setting to enhance the reproduction of documents that contain text
and graphics. This CRD is best for printing colored charts, graphs, presenta-
tion materials and so on. If you use this CRD for printing photographs, color
or gradations might not be reproduced well.
*3
Use this setting to print specific colors, logos and so on.
• Black Text/Graphics
Use this to select the black color mode to [K] or [CMY+K].
Note
If [K] is selected, the black parts of text and graphics are printed with
only black toner.
• Toner Saving
Use this to set Toner Saving to [On] or [Off].
Note
Turning on toner saving can cause the output to become blurred and re-
sult in very thin lines not printing at all. In the case of color printing, ton-
er saving can cause colors to be different from those expected. Because
of this, use toner saving only for proofing and intermediate drafts, and
turn it off for final prints when top quality is important.
• Dithering
Use this to select the image rendering mode. The following items are avail-
able: [Auto], [Photographic] and [Text].
Note
When you use the printer that does not support [Auto], the default set-
ting is [Photographic].
• Paper Type
Use this to select the paper type. The following items are available: [Plain
Paper], [OHP Transparency], [Thick Paper], [Plain (Duplex Backside)] and [Thick
(Duplex Backside)].
28
*1 *2
, [Presentation] and [Solid Color]
*3
.
Draft 2000/06/22