Table of Contents
Advertisement
Troubleshooting
B
Open paper exit cover 2 inside of
paper exit cover 1.
Note
When opening paper exit cover
2, be careful not to touch the fus-
ing section because it could be
very hot.
4
C
Push the front cover release but-
ton and open the front cover.
D
Turn the dial downward, then re-
move the misfed paper.
Note
When removing misfed paper,
be careful not to touch the fus-
ing section because it could be
very hot.
62
When you can see the misfed
paper inside the printer
Note
If it is difficult to turn the dial,
turn it slightly upward and then
try again.
A Remove the misfed paper from
inside of the printer.
While turning the dial, remove
the misfed paper as shown in
the illustration. Be careful not to
leave any misfed paper in the
printer.
Note
When removing misfed pa-
ZBGY060E
per, be careful not to touch
the fusing section because it
could be very hot.
ZBGY011E
When you cannot see the misfed
paper inside the printer
A Remove the misfed paper from
the output tray.
While turning the dial, remove
the misfed paper as shown in
the illustration. Be careful not to
leave any misfed paper in the
printer.
ZBGY070E
Draft 2000/06/22
Advertisement
Chapters
Table of Contents
