Setting Up The Printer Driver - Ricoh AFICIO AP306 Setup Manual

Windows 95/98 Configuration
Uninstalling Multidirect Print
A
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
B
1
On the [Install/Uninstall] tab, click [Multidirect Print], and click [Add/Remove].
C
After a confirmation message appears, click [Yes].
UninstallShield removes all of the components of Multidirect Print.
D
When the uninstallation is complete, restart the computer.

Setting Up the Printer Driver

Multidirect Print cannot be used until the printer driver is installed and the cor-
rect port is selected.
Preparation
The target printer must be turned on before starting the installation process.
A
Install the printer drivers.
If the printer drivers have already been installed, you can proceed to the next
step.
Reference
For more information about installing the printer drivers, see the "Setup
Guide" that comes with the printer.
Note
Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
From the [Printers] window, click the icon of the printer. On the [File] menu,
click [Properties].
C
Click the [Details] tab, and then click [Add Port].
D
In the [Add Port] box, click [Other], click [Multidirect Print], and then click [OK].
The [Select Printer] dialog box appears, and the printers which can be printed
to by TCP/IP are displayed.
Limitation
If PRINTER MANAGER FOR CLIENT is not installed on the computer,
printers which can be printed to by TCP/IP are not displayed. For more in-
formation about how to install the program, see the "Setup Guide" that
comes with the printer.
10
Draft 2000/06/22