Display Module Installing / Removal (Only Fx 3Uc -32Mt-Lt); Removal; Installing - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
3.8 Display module Installing / Removal (Only FX
The FX - MT/D and FX
3UC
3.8.1

Removal

1) Gently place the tip of a flat blade screwdriver to the Display module
fixing hooks (right fig.
2) Tilt the flat blade screwdriver at the two Display module fixing hooks to
lift the display module from the main unit by about 1mm (0.04") (right fig.
).
Carefully perform the above trying not to bend or break the Display
module fixing hooks.
3) Hold the display module (right fig.) and remove the display module.
3.8.2

Installing

Put the connector of the display module on the main unit (figure on
1)
the right).
2) Push the display module to install it (
3.8 Display module Installing / Removal (Only FX3UC-32MT-LT)
- MT/DSS do not support the display module.
3UC
).
in the figure on the right).
3 Generic Specifications/Installation Work
-32MT-LT)
3UC
Fixed
hook
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
117