Mitsubishi FX3UC SERIES User Manual page 46

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
4. Data link and communication functions
When connected to the special function blocks in the following table, the FX
5V is required.
E
Model name
FX -232IF
2N
FX -16CCL-M*
2N
FX -32CCL
2N
FX -64CL-M
2N
FX -32ASI-M*
2N
FX -16LNK-M
2N
*1. Either the FX
Only one FX
can be connected in one system, but remote I/O stations cannot be connected to the second and
later master stations.
*2. The number of input/output occupied points in the FX
formula
Number of input/output occupied points = Number of remote I/O stations × 32 points + 8 points
*3. The number of input/output occupied points in the FX
formula
Number of input/output occupied points = Total number of input/output points in remote I/O
stations + 8 points
*4. The number of input/output occupied points in the FX
formula
Number of input/output points =
*5. The number of points varies according to the products connected to the network.
For details, refer to the FX
40
1-ch RS-232C no-protocol communication
Master for CC-Link
Connectable stations:
1
Remote I/O station: 7 stations
Remote device station: 8 stations
Remote device station for CC-Link
[1 to 4 stations occupied]
Master for CC-Link/LT
1
Master for AS-i system
Master for MELSEC I/O Link
-16CCL-M or the FX
2N
-32ASI-M unit can be connected in a system. Two or more FX
2N
Main unit (Ver.2.20 or later) Number of active slaves × 8 points + 8 points
Main unit (Earlier than Ver.2.20) Number of active slaves × 4 points + 8 points
-16LNK-M Manual.
2N
Description
-32ASI-M can be connected in one system.
2N
-16CCL-M is obtained using the following
2N
-64CL-M is obtained using the following
2N
-32ASI-M is obtained using the following
2N
1 Outline
1.4 List of Products
-CNV-IF or FX -1PS-
2NC
3UC
Number
5V DC current
of input/
consumption
output
(mA)
points
8 40
*2 -
8 130
*3 190
*4 150
*5 200
-16CCL-M units
2N