Mitsubishi FX3UC SERIES User Manual page 335

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
2. Timer [T], counter [C]
1) Perform a monitor mode operation to display the device where the
test function is to be used.
→ Refer to Subsection 10.5.2 for monitor function operation.
2) Press the [OK] button to display the cursor, then select the "test
subject selection screen".
To cancel the operation and return to the "monitor screen", press
[ESC].
3) Use the [+]/[-] buttons to select the test subject.
To cancel the operation and return to the "monitor screen", press
[ESC].
Test Subject
[1]
[2]
[3]
4) Hold the [OK] button for 1 second or longer to register the test
subject selection, and switch to the test mode.
To cancel the operation and return to the "test subject selection
screen", press [ESC].
Test Subject
[1]
[2]
[3]
5) Operation varies as shown below, depending on the selected test subject.
a) For "contact forced ON/OFF"
The contact ON/OFF status is highlighted when [OK] is pressed.
Button
ESC
-
+
OK
b) For "current value change"
Use the [+]/[-] buttons to change the value as desired, then
press [OK] to register the changed value.
Button
ESC
-
+
OK
Test Description
Contact forced ON/OFF
Current value change
Setting value change
Status when [OK] is hold for 1 second or longer
No change
Numeric value begins blinking.
Operation Description
Cancels the operation and returns to the "test
subject selection screen".
Disabled
Disabled
Highlights the contact ON/OFF status, meaning the
current value can not be changed.
Operation Description
Cancels the operation and returns to the "test
subject selection screen".
Reduces the value. Hold for 1 second or longer for
high-speed reduction.
Increases the value. Hold for 1 second or longer for
high-speed increase.
Registers the current value or the setting value and
returns to the "test subject selection screen".
10 Display Module (Only FX3UC-32MT-LT)
10.5 Monitor/Test Mode [Excluding User-Registered Devices]
[Monitor screen]
T
[Test subject selection screen]
T
T 0
T 0
T
T
0 P R
0
1 0 0 0
0 P R
0
1 0 0 0
[1]
P R
[2]
0
[3]
1 0 0 0
P R
0
1 0 0 0
0 P R
0
1 0 0 0
0 P R
0
1 0 0
329
1
2
3
4
5
6
7
8
9
10