Number Of Required Output Blocks [Bfm #21 (15H)]; Data Link Final Station Information [Bfm #22(16H)]; External Switch Information [Bfm #26 (1Ah)] - Mitsubishi FX3UC SERIES User Manual

FX FX Series Programmable Controllers Series Programmable Controllers
3UC 3UC
User's Manual - Hardware Edition User's Manual - Hardware Edition

9.18.6 Number of required output blocks [BFM #21 (15h)]

The number of output blocks (8 points/block) required to assign the I/O numbers of remote stations is stored
here.

9.18.7 Data link final station information [BFM #22(16h)]

The final station number available in data link is stored here.
(The available final station number is set by the station information stored in the EEPROM.)
If the final station number is specified as a reserved station, the reserved station is included.

9.18.8 External switch information [BFM #26 (1Ah)]

The DIP switch for the operation the setting (at the time of power ON) is stored here.
1. Detailed description
Each DIP switch number is assigned to a bit of the buffer memory [BFM #26 (1Ah)]. The ON/OFF status of
each bit of the DIP switch is indicated by the 0 (OFF)/1 (ON) status of each bit of the buffer memory.
Bit
b0
b1
b2
b3
b4
b5
b6
b7
b8 to b15
312
Bit No. of DIP switch
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
-
9 CC-Link/LT Built-in master ability (Only FX3UC-32MT-LT)
0 (OFF): The bit of the DIP switch is OFF
1 (ON): The bit of the DIP switch is ON
Description
The setting of each bit of the DIP switch is stored.
0: The bit of the DIP switch is OFF.
1: The bit of the DIP switch is ON.
(Prohibited to use)
9.18 Details of buffer memory