Mitsubishi FX3UC SERIES User Manual page 266

FX FX Series Programmable Controllers Series Programmable Controllers
3UC 3UC
User's Manual - Hardware Edition User's Manual - Hardware Edition
3. When the high flexible cable is used as the trunk line
Master
unit
*1
*1
Remote
I/O station
Trunk line (High flexible cable)
Drop line (Dedicated flat cable)
Drop line (VCTF cable/High flexible cable)
*1. For the processing procedure of the high flexible cable connector (for connecting the terminal
resistor), refer to Subsection 9.8.4.
*2. For the processing procedure of the dedicated flat cable connector (for connecting the terminal
resistor), refer to Subsection 9.8.3.
260
Connecting terminating resistor on master unit side
Terminating resistor (CL9-TERM)
High flexible High flexible
cable connector cable connector
(For master unit) (For terminating resistor)
*1
*2
Power supply
adapter
Remote
I/O station
General
power supply
(24V DC)
9 CC-Link/LT Built-in master ability (Only FX3UC-32MT-LT)
install
*1
High flexible
cable
*1
*1
Remote
I/O station
*1
Remote
I/O station
*1
Remote
I/O station
VCTF/high flexible cable connector
Dedicated flat cable connector
Terminating resistor (CL9-TERM)
9.5 Combination and mixed use of cables
*2
Remote
I/O station
Module
with cable
Remote
I/O station
*2
Remote
I/O station
Commercially
available terminal
*1
*1
200mm (7.87")
or less