Pointers For Using The Display Screen Protect Function - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition

10.17.6 Pointers for using the display screen protect function

The display screen protect function settings should be specified in a sequence program.
• The protect function is enabled by using the display module's "monitor/test function" to change the system
information's (system signal 1) "D
• Once the setting is made, it cannot be canceled from the display module.
• To cancel the setting, use the programming tool to change the system information's (system signal 1)
"D + 8" current value to a value other than "1" and "2".
If the system information's (system signal 1) "D
the display screen protect function can be canceled by turning the power off, then on again.
+ 8" current value to "1" or "2".
+ 8" is set in a general purpose data register, however,
10 Display Module (Only FX3UC-32MT-LT)
10.17 Display Screen Protect Function
1
2
3
4
5
6
7
8
9
10
355