(When 5 Or More Devices Are Displayed As User-Registered Devices) - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
10.20.5 Program example 3 (when 5 or more devices are displayed as user-registered devices)
Use this program example as a reference when setting 5 or more devices as user-registered devices.
1. Operation
In this program example, the 7 devices shown in the table below are set as user-registered devices, with the
current value display format set individually for each device.
1) The display formats specified here apply only to current values which appear at the "user-registered
device" menu. Other current values appear in a decimal format.
2) In this program example, system information is assigned from D50 to D90 and from M50 to M56.
User-Registered Device
No.
1
2
3
4
5
6
7
2. Program
M8002
Initial pulse
M8002
Initial pulse
User-
User
registered
message
device
display
monitoring
in progress command
M56 M54
User-
User
registered
message
device
display
monitoring
in progress command
M56 M54
M60
Continued on next page
Devices Set As User-
Registered Devices
D100 (D101)
D102
D103
D104
D200
D210
D201
MOV
MOV
FMOV K-1
ZRSTP
[+] button ON
M53
SFTLP M60 M61
M61
M67
[-] button ON
M52
SFTRP M58 M59
M59
MOV
MOV
10 Display Module (Only FX3UC-32MT-LT)
10.20 User (User-Registered Device Setting)
Display
Data Length
Format
32-Bit Hexadecimal
16-Bit Decimal
16-Bit Decimal
16-Bit Decimal
16-Bit Hexadecimal
16-Bit Decimal
16-Bit Hexadecimal
System information (system No.1) is
K50 D8300
set at D50 to D90.
System information (system No.2) is
K50 D8301
set at M50 to M56.
Sets "K-1" at D52 to D57 because user-
D52 K6
registered devices 2 to 4 are unused.
At Monitor/Test screens other than
the "user-registered device" screen,
RST M55
the current values and setting values
are displayed in a decimal format.
Initialization of the user-registered
M58 M67
screen's scroll flag.
Setting of flag that specifies the
SET M60
default user-registered devices.
K7 K1
RST M60
SET M60
User-registered device screen scroll
RST M67
program (by [+] and [-] buttons).
K8 K1
RST M59
SET M66
K8 D50
Sets the first device which appears at
the user-registered device screen as
K100 D51
a "D101, D100" 32-bit device, with a
hexadecimal current value display
format.
SET M55
1
2
3
4
5
6
7
8
9
10
361