Test Mode Operation; Error Check - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition

10.6.2 Test mode operation

1) Perform a monitor mode operation to display the user-registered
device whose current value is to be changed.
→ Refer to Subsection 10.5.2 for monitor function operation.
2) Hold the [OK] button for 1 second or longer to switch to the test
mode. The current value then begins blinking (refer to fig. at right).
3) Use the [+]/[-] buttons to change the value as desired. To cancel the
operation and return to the "monitor screen", press [ESC].
Button
ESC
-
+
OK
4) Press [OK] to register the current value and return to the "user registered devices screen".
10.7

Error Check

The main unit's error status displays at the "ErrorCheck" menu.
1) At the menu screen, use the [+]/[-] buttons to move the cursor to the
"ErrorCheck" item, then press [OK].
The error check result then displays at the "error display screen"
(refer to fig. at right).
To cancel the operation and return to the "Main unit I/O operation
display", press [ESC] at the menu screen
2) If multiple errors have occurred, the [+]/[-] keys can be used to
switch between the error display pages.
Button
ESC
1 error or less
-
2 errors or more
1 error or less
+
2 errors or more
OK
Display Content
[1]
Active error flag
[2] Error name
[3]
Error code
Number of concurrent errors
[4]
(displays only when multiple errors have occurred)
3) To cancel the operation and return to the "menu screen", press
[ESC].
Operation Description
Cancels the operation and returns to the "monitor
screen".
Reduces the value.
Hold for 1 second or longer for high-speed reduction.
Increases the value.
Hold for 1 second or longer for high-speed increase.
Registers the current value and returns to the "monitor
screen".
Operation Description
Returns to the "menu screen".
Disabled
Displays the previous-page's error screen.
Disabled
Displays the next-page's error screen.
Returns to the "menu screen".
Display Content
10 Display Module (Only FX3UC-32MT-LT)
10.7 Error Check
H a l t t i m e r
D 1 0 0
H a l t t i m e r
D 1 0 0
H a l t t i m e r
D 1 0 0
When no errors have occurred
E r r o r C h e c k
N o E r r o r
When one error has occurred
E r r o r C h e c k
M 8 0 6 6
L a d d e r e r r o r
E r r o r c o d e 6 6 1 2
When more than one error has
occurred
E r r o r C h e c k 1
M 8 0 6 0
I / O e r r
E r r o r c o d e 1 0 2 0
- +
E r r o r C h e c k 2
M 8 0 6 3
L i n k e r r o r 1
E r r o r c o d e 6 3 0 1
1
2
1 0
3
1 0
4
2 0
5
6
7
[1]
[2]
[3]
8
/ 2 [4]
[1]
[2]
9
[3]
/ 2 [4]
[1] 10
[2]
[3]
333