Judgment By Error Codes And Representation Of Error Codes; Operation And Check On Display Module - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
12.6

Judgment by Error Codes and Representation of Error Codes

Error codes can be checked with the programming tool or on the display module (Only FX

12.6.1 Operation and check on display module

1) Move the cursor to "ErrorCheck" pressing the + or - button on the menu screen (shown right).
For the menu configuration, refer to Section 10.4.
The buttons on the menu screen work as stated below.
Operation
button
ESC
-
+
OK
2) When the OK button is pressed, an error check is performed.
The results are displayed on the error display screen (shown to the
right).
Pressing the ESC button on the menu screen cancels the operation
and returns the screen to the Main unit I/O operation display.
3) If some errors have occurred, the pages can be switched with the +
or - button.
Operation
button
ESC
1 error
or less
-
2 errors
or more
1 error
or less
+
2 errors
or more
OK
Displayed data
[1]
Flag of occurred error
[2] Error name
[3]
Error code
Number of simultaneously occurring errors
[4]
(displayed only when more than one error has occurred)
4) Pressing the ESC button cancels the operation and returns the screen to the Menu screen.
Operation
The screen returns to the top screen (time display).
The cursor moves upward. When the button is held
for 1 second or more, the cursor moves quickly.
When the cursor is in the uppermost position, the
button is ineffective.
The cursor moves downward. When the button is
held for 1 second or more, the cursor moves
quickly.
When the cursor is in the lowermost position, the
button is ineffective.
The flashing item at the cursor is selected.
Operation
The screen returns to the Menu screen.
Ineffective operation
The previous page of the error display screen is
displayed.
Ineffective operation
The following page of the error display screen is
displayed.
The screen returns to the Menu screen.
Displayed data
12 Test Operation, Adjustment, Maintenance and Troubleshooting
12.6 Judgment by Error Codes and Representation of Error Codes
When no errors have occurred
When one error has occurred
When more than one error has
occurred
-32MT-LT).
3UC
M o n i t o r / T e s t
E r r o r C h e c k
L A NGU A G E
C o n t r a s t
C l o c k M e n u
E n t r y C o d e
C l e a r A l l D e v
P L C S t a t u s
S c a n T i m e
C a s s e t t e
E r r o r C h e c k
N o E r r o r
E r r o r C h e c k
M 8 0 6 6
L a d d e r e r r o r
E r r o r c o d e 6 6 1 2
E r r o r C h e c k 1 / 2
M 8 0 6 0
I / O e r r
E r r o r c o d e 1 0 2 0
- +
E r r o r C h e c k 2 / 2
M 8 0 6 3
L i n k e r r o r 1
E r r o r c o d e 6 3 0 1
11
12
A
B
C
D
[1]
[2]
[3]
E
[4]
[1]
[2]
F
[3]
[4]
[1]
[2]
[3]
395