Mitsubishi FX3UC SERIES User Manual page 283

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
c) When the VCTF cable/high flexible cable is used as the trunk line
5) Cut at the root of the tip of the
cover with nippers, etc., and
remove the tip
After striping the sheath by 70mm (2.75") or more, perform the procedure for the dedicated flat cable
in the same way as the T-branch.
VCTF cable/
High flexible cable
connector
9.8 Connection of Cables, Connectors and Terminating Resistors
6) Set the cover to the point
where the T-branch will be set.
Cut off here.
VCTF cable/
High flexible cable
connector
9 CC-Link/LT Built-in master ability (Only FX3UC-32MT-LT)
Trunk line, Drop line: VCTF cable, High flexible cable
7) Execute press-fitting in the
same way as steps 3) and 4)
of the attachment procedure.
VCTF cable/High flexible cable
(trunk line)
VCTF cable/High flexible cable
(drop line)
1
2
22.5mm
(0.88")
3
4
5
6
7
8
9
10
277