Mitsubishi FX3UC SERIES User Manual page 180

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
6. Output current
The ON voltage of the output transistor is approx. 1.5V.
When driving a semiconductor element, carefully check the input voltage characteristics of the applied
element.
Model
Y000 to Y003
Main units
Y004 or later
FX
FX
FX
Extension
FX
blocks
FX
FX
FX
FX
FX
*1. When using an instruction related to pulse train output or positioning, make sure to set the load
current to 10 to 100mA (5 to 24V DC).
7. Open circuit leakage current
0.1mA or less
174
Output current
0.3A/1 points
0.1A/1 points
-16EYT(-DSS)
2NC
0.1A/1 points
-32EYT(-DSS)
2NC
-16EYT-C 0.3A/1 points
2N
-8EYT(-ESS/UL)
2N
-8EYT
0N
0.5A/1 points
-16EYT(-ESS/UL)
2N
-16EYT
0N
-8EYT-H
2N
1A/1 points
-8EYT-H
0N
6 Output Specification and External Wiring
Make sure that the total load current of resistance loads per
*1
common terminal (16points/common) is 1.6A so that
temperature rise is restrained.
Make sure that the total load current of 8 resistance load
points is 0.8A or less.
Make sure that the total load current of 16 resistance load
points is 1.6A or less.
The total load current of resistance loads per common
terminal should be the following value.
4points/common: 0.8A
8points/common: 1.6A
Make sure that the total load current of 4 resistance load
points is 2A or less.
6.2 Transistor Output
Limitation