Procedures For Installing On And Detaching From Din Rail; Procedures For Installing To And Removing From Din Rail - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
3.3

Procedures for Installing on and Detaching from DIN Rail

The main unit, FX
can be installed on a DIN46277 rail [35mm (1.38") wide]. (It cannot be installed directly with screws.)
The FX /FX
0N 2N
be installed on a DIN46277 rail [35mm (1.38") wide] and directly mounted.
→ For the installation of remote I/O stations, dedicated power supply and power supply adapter for
3.3.1

Procedures for installing to and removing from DIN rail

1. FX Series main unit, FX
3UC
function block, Extension power supply unit, FX
(Example : FX
3UC
1) Connect all of the main unit, I/O extension blocks for FX
extension power supply unit and FX
2) Push the DIN rail mounting hooks
blocks as shown in the figure on the right
3) Align the upper side of the DIN rail mounting groove with the
DIN rail ( in the figure on the right).
4) While pressing the main unit onto the DIN rail, lock the DIN
rail mounting hooks as shown in the figure below
I/O extension block, FX
2NC
I/O extension block, FX /FX
0N
Series I/O extension block, FX
2NC
-32MT/D)
2NC
of all connected units/
3 Generic Specifications/Installation Work
3.3 Procedures for Installing on and Detaching from DIN Rail
/FX special function block, and FX
2NC 3UC
/FX special function block, and FX
2N 3U
CC-Link/LT, refer to the manual of each product.
-CNV-IF
2NC
, special extension blocks for FX
2NC
-CNV-IF.
→ For connecting method, refer to Subsection 3.4.2.
.
A
B
.
B
special adapter
3U
special adapter can
3U
/FX Series special
2NC 3UC
2NC
A
1 1
2 2
3 3
/FX ,
3UC
4 4
5 5
6 6
7 7
8 8
9 9
10 10
107