Installation Location - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
3.2

Installation location

Install the PLC in an environment conforming to the generic specifications (section 3.1), installation
precautions.
For information on the installation location for remote I/O stations and the CC-Link/LT power supply, refer to
the manual of each product.
• Keep a space of 50mm (1.97") or more between the unit main body and another device or structure. Install the unit
as far away as possible from high-voltage lines, high-voltage devices and power equipment.
• To prevent temperature rise, do not install the PLC on a floor, a ceiling or a vertical surface.
Install it horizontally on a wall as shown below.
106
Notes
Configuration without
extension cable
A
A
A
FX
3UC
Main unit
A
≥50mm
A
(1.97")
3 Generic Specifications/Installation Work
3.2 Installation location
Configuration with extension cable
A
FX
3UC
A
Main
unit
A
FX -65EC
0N
FX -30EC
0N
A
Other
equipment
A
A
FX -CNV-BC
2N
Other equipment
≥50mm
A
A
(1.97")