FX
Series Programmable Controllers
3UC
User's Manual - Hardware Edition
10.16.2 System information setting program example
The following is a program example in which the system information has been assigned to D50 to D90 and
M50 to M56.
M8002
Initial pulse
352
MOV
K50
D8300
System information (system No.1) is set at D50 to D90.
MOV
K50
D8301
System information (system No.2) is set at M50 to M56.
END
10 Display Module (Only FX3UC-32MT-LT)
10.16 System Information (Restrictions From PLC)