Chapter 5: Installing The 1140E Ip Deskphone; Before You Begin; Connecting The Components - Avaya 1140E Software User's Manual

Chapter 5: Installing the 1140E IP
This chapter describes how to install and connect your 1140E IP Deskphone.

Before you begin

Caution:
Do not plug your IP Deskphone into a regular telephone jack. This can result in severe damage to the
IP Deskphone. Consult your system administrator to ensure that you plug your telephone into a
10/100/1000 BaseT Ethernet jack.
Caution:
Your IP Deskphone is designed for use in an indoor environment only.
Caution:
Do not plug your Avaya 1140E IP Deskphone into an Integrated Service Digital Network (ISDN)
connection. Severe damage to the Avaya 1140E IP Deskphone can result.

Connecting the components

Install your IP Deskphone by completing the following procedures in the order listed:
• Removing the stand cover
• Connecting the AC power adapter (optional)
• Connecting the handset
• Connecting the headset (optional)
• Connecting the LAN ethernet cable
• Installing additional cables
• Wall-mounting the IP Deskphone (optional)
IP Deskphone Connections
August 2017
Deskphone
on page 48
on page 49
on page 49
on page 50
on page 51
on page 47 shows the connections on the IP Deskphone.
Avaya 1140E IP Deskphone with SIP Software User Guide
Comments on this document? infodev@avaya.com
on page 48
on page 51
46