Show Policy-Map Interface Control-Plane - Cisco Nexus 7000 Series Command Reference Manual

show policy-map interface control-plane

show policy-map interface control-plane
To display packet-level statistics for all classes that are part of the applied control plane policing (CoPP)
policy, use the show policy-map interface control-plane command.
show policy-map interface control-plane {[module module-number [inst-all]] [class {class-name| violated}]|
[class {class-name| violated}] [module module-number [inst-all]]}
Syntax Description
class class-name
module module-number
violated
inst-all
Command Modes
Any command mode
Command History
Release
8.1(1)
6.2(2)
Usage Guidelines
Use this command to display the policy values with associated class maps and drops per policy or class map.
It also displays the scale factor values when a CoPP policy is applied. When the scale factor value is the default
(1.00), it is not displayed.
The scale factor changes the CIR, BC, PIR, and BE values internally on each module, but the display
Note
shows the configured CIR, BC, PIR, and BE values only. The actual applied value on a module is the
scale factor multiplied by the configured value.
This command does not require a license.
Examples This example shows how to monitor CoPP:
switch# show policy-map interface control-plane
Control Plane
service-policy input: copp-system-policy-default
Cisco Nexus 7000 Series Security Command Reference
846
Displays the packet-level statistics for the specific
class.
Displays the packet-level statistics for the specific
module. The range is from 1 to 18.
Displays classes that have violated the police rate.
Displays per-instance statistics.
Modification
Added the inst-all keyword.
This command was introduced.
Show Commands