Replacing The Separation Roller Assy - Konica Minolta BIZHUB 501 Service Manual

Field Service Ver.2.0 Mar. 2009
3.12.2

Replacing the separation roller assy

A. Periodically replaced part/cycle
• Separation roller assy
*1 501/421
*2 361
Note
• When replacing the separation roller assy, be sure also to replace the feed roller at the same time.
B. Procedure
[2]
: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
[2]
[2]
[1]
50gaf2c004na
1. Remove the bypass unit.
(See P.62)
2.
Remove the 2 springs [1].
3.
Remove the 5 screws [2].
3. PERIODIC CHECK
65