Konica Minolta BIZHUB 501 Service Manual page 285

10. SERVICE MODE
Step
Using the telephone line
modem
7 Proceed to step 8.
8 Setting the telephone number of the Center
1. Select [Service Mode] → [CS Remote Care],
and press [Detail Setting].
2.
Press [Machine Setting] → [Center Telephone
Number].
3.
Input the telephone number of the Center
using the 10-Keys Pad and [P], [T], [W], [-].
(See P.258)
9 Inputting the Device telephone number
1. Select [Service Mode] → [CS Remote Care],
and press [Detail Setting].
2. Press [Machine Setting] → [Device Telephone
Number].
3.
Input the Device telephone number using the
10-Key Pad and [P], [T], [W], [-].
(See P.258)
248
Procedure
Using the Fax line
modem *1
Encryption setting
1.
2.
Retransmission interval on e-mail delivery error
• When selecting [E-mail2], set the retrans-
Setting the Respond Timeout
1.
2.
NOTE
• Under normal conditions, there is no
need to change the default setting.
(See P.258)
Proceed to Step 10.
Field Service Ver.2.0 Mar. 2009
Using E-mail
Select [Service Mode] → [CS Remote Care],
and press [Detail Setting].
Press [Basic Setting] and select either
Encryption or No Encryption.
mission interval on e-mail delivery error in
software SW setting.
(See P.259)
Select [Service Mode] → [CS Remote Care],
and press [Detail Setting].
Press [Respond Timeout] and enter the
response timeout using the 10-Key Pad.