Field Service Ver.2.0 Mar. 2009
ADJUSTMENT / SETTING
4. SERVICE MODE
In the service mode, various adjustments / settings are available.
See "10. SERVICE MODE" in Field Service for the main body.
5. Starting and Finishing the Service Mode
1.
Confirm that the normal Copy Mode screen is on the display.
2.
Press the [Utility/Counter] button.
[Utility] screen appears.
3.
Press [Meter Count] provided at the upper left section of the screen.
4.
Press the [Details] key.
[MetaCount] screen appears.
5.
Press the keypad in the following order.
Stop -> 0 -> 0 -> Stop -> 0 -> 1
[Service Mode menu] screen appears.
NOTE
• If the CE password has been provided, you should enter the password to enter the service mode.
6.
Press the key of items to be set.
Setting screen of each item appears.
7.
Set items as required and press the [OK] key after completion.
Setting is accepted and the [Service Mode menu] screen returns.
8.
Press the [Exit] key.
Normal Copy Mode screen returns.
4. SERVICE MODE
9