Konica Minolta BIZHUB 501 Service Manual page 582

Field Service Ver.1.0 May. 2008
[2]
[2]
[4] [5]
[3] [1]
16aaf2c005na
[3] [1]
[2]
16aaf2c006na
[1]
16aaf2c007na
9.
Remove the screw [1] and then remove the han-
dle [3] from the roller mounting plate [2].
10.
Remove the screw [4] and then remove the bear-
ing holder [5] from the roller mounting plate [2].
11.
Remove the bearing [1] and then remove the pick-
up roller [3] from the shaft [2].
12.
Remove the pick-up rubber [2] from the pick-up
roller [1].
Note
• When setting the pick-up rubber, apply alco-
hol on the inside of the pick-up rubber. By
doing so, the pick-up rubber can be set more
easily.
13.
Reinstall the above parts following the removal
steps in reverse.
2. PERIODIC CHECK
7