Konica Minolta BIZHUB 501 Service Manual page 632

Field Service Ver.1.0 May. 2008
D. Stapling
Staple filling method
Staple detection
Staple position *1
Manual staple
*1 In case of the 1-staple mode, conduct a parallel and a skew adjustment according to the length in the
main scan direction.
Parallel: main scan direction 182 to 216 mm
Diagonal: main scan direction 216 to 297 mm
E. Punch
No. of holes
Punch scraps full detection
F. Maintenance
Maintenance
G. Machine data
Power source
Power consumption
Dimensions
Weight
H. Operating environment
Temperature
Humidity
Note
• The information herein may be subject to change for improvement without notice.
Dedicated staple cartridge (5000 staples)
Available (near empty: 20 remaining staples)
Rear: Diagonal 45° 1 point
Front: Diagonal 45° 1 point
Rear: Diagonal 28° 1 point
Front: Diagonal 28° 1 point
Rear: Parallel 1 point
Front: Parallel 1 point
Side: 2 points
None
Inch: 2 holes, 3 holes
Metric: 4 holes
None
Same as the main body.
24V DC ± 10 % (supplied from the main body)
63 W or less
538 (W) x 637 (D) x 978 (H) mm
39.2 kg
Same as the main body.
Same as the main body.
1. PRODUCT SPECIFICATION
Metric: A3, B4, A4, B5
/ x 11, 11 x 17
Inch: 8
1
2
Metric: B4, B5
Inch: —
Metric: A4S, B5S
Inch: 8 / x 11S, 8 / x 14
1 1
2 2
Metric: A4, A4S, A3, B5, B5S, B4
Inch: 8 / x 11, 8 / x 11S, 8
1 1
2 2
/ x 14, 11 x 17
1
2
3