Konica Minolta BIZHUB 501 Service Manual page 356

Field Service Ver.2.0 Mar. 2009
C. Key Counter Only
• To set whether or not the key counter is installed.
Functions
• Set when the key counter is mounted.
Use
• Select [Color Mode] and [Message] when the key counter is mounted.
✽ Color Mode
Setting/
• When [Mode 1] is set on [Total Counter Mode] after selecting [Billing Setting] →
Procedure
[Counter setting].
Mode 1: 1 count per 1 copy cycle
Mode 2: 2 counts per 1 copy cycle
Mode 3: 3 counts per 1 copy cycle
Mode 4: 4 counts per 1 copy cycle
Mode 5: 5 counts per 1 copy cycle
• When [Mode 2] is set on [Total Counter Mode] after selecting [Billing Setting] →
[Counter setting] and large size is selected on [Large Size Counter Mode]
Mode 1: 2 counts per 1 copy cycle
Mode 2: 4 counts per 1 copy cycle
Mode 3: 6 counts per 1 copy cycle
Mode 4: 8 counts per 1 copy cycle
Mode 5: 10 counts per 1 copy cycle
• When [Mode 2] is set on [Total Counter Mode] after selecting [Billing Setting] →
[Counter setting] and sizes other than large size are selected on [Large Size Counter
Mode]
Mode 1: 1 count per 1 copy cycle
Mode 2: 2 counts per 1 copy cycle
Mode 3: 3 counts per 1 copy cycle
Mode 4: 4 counts per 1 copy cycle
Mode 5: 5 counts per 1 copy cycle
✽ Message
Setting/
Procedure Select the message type when the administrative unit is mounted.
Type 1: Message for key counter
Type 2: Message for card scanning
Type 3: Message for ID management
Type 4: Message for remote SW
✽ Confirmation copy
• Set whether to allow a confirmation copy when a key counter is installed.
• The default setting is Ban.
✽ The next job reservation
• Set whether to allow the reservation of the next job when a key counter is installed.
• The default setting is Ban.
NOTE
• The setting is available only when user authentication and account track are
set "OFF" with [Administrator Settings] → [User Authentication/Account
Track] → [General Setting].
License
License
10. SERVICE MODE
"Ban"
"Ban"
319
1