Konica Minolta BIZHUB 501 Service Manual page 684

Field Service Ver.1.0 May. 2008
[10]
[9a]
[9]
[10]
[10a]
[11a]
[11]
[15] [13]
[16] [18] [17]
[10b]
a0phf2c003ca
[11]
[12]
[11a]
4511f2c038nb
[14] [13]
a0phf2c004ca
10. Remove the screw [9], and then remove
the Mounting Bracket [9a] and the Lock
Release Lever [10].
NOTE
• Be careful that when the Mounting
Bracket [9a] is removed, the spring
[10a] is also removed.
• When installing the spring, install the
end of spring [10a] into the gap [10b]
between the ribs.
11. Remove four screws [11] and four
screws [11a], and remove the Lower
Cover [12].
12. Remove four screws [13], and remove
the plate [14] and [15].
13. Unplug the connector [16] and remove
the screw [17], and then remove the
Paper Guide Gear Assy [18].
3. OTHER
15