Konica Minolta BIZHUB 501 Service Manual page 284

Field Service Ver.2.0 Mar. 2009
Step
Using the telephone line
modem
1 Connecting the
modem
Turn the power for the
modem OFF. Connect
the machine and the
modem with a modem
cable. Connect the
modem and the wall
jack with a modular
cable.
* For connecting the
modular cable, see the
manual for the modem.
2 Clearing the RAM
1.
Select [Service Mode] → [CS Remove Care], and press [Detail Setting].
2.
Press [RAM Clear].
3.
Select Set, and press [OK].
(See P.259)
3 Selecting the CS
Remote Care function
Select [Service Mode]
→ [CS Remove Care]
→ [System Selection],
and press [Modem].
4 Inputting the ID Code
1.
Select [Service Mode] → [CS Remote Care] → [ID Code], and press [ID Code].
2.
Input the seven digits ID of the service person, and press [ID Code] again.
(See P.257)
5 Setting the date and time for CS Remote Care
1. Select [Service Mode] → [CS Remote Care], and press [Detail Setting].
2. Press [Date & Time Setting].
3.
Input the date, time and the time zone using the 10-Key Pad, and press [Set].
(See P.259)
6 Setting the Center ID
1. Select [Service Mode] → [CS Remote Care], and press [Detail Setting].
2. Press [Machine Setting] → [Center ID], and input the Center ID (five digits).
(See P.258)
Procedure
Using the Fax line
modem *1
Be sure to remove the Be sure to remove the telephone line modem
telephone line modem when e-mail is used.
when the fax line is
used.
Selecting the CS Selecting the CS Remote Care function
Remote Care function Select [Service Mode] → [CS Remote Care] →
Select [Service Mode] [System Setting], and press [E-Mail 1] or [E-Mail
→ [CS Remove Care]
2].
→ [System Selection],
[E-Mail1]: Duplex
and press [Fax]. [E-Mail2]: Simplex (from machine to center)
10. SERVICE MODE
Using E-mail
247
1