Konica Minolta BIZHUB 501 Service Manual page 304

Field Service Ver.2.0 Mar. 2009
Error code
4104 SMTP Channel Not Ready
4105 POP3 Channel Not Ready
4106 Not Ready other than the ones listed above.
Note
• When a code other than the ones listed above is displayed, contact KMBT and inform the error
code.
C. When connecting by Fax modem
Error code
T50 Host terminal ID not correct
R80 Serial number received from the host not cor-
rect.
R81 Disconnection of writing instruction from host
during machine is running.
R82 Disconnection of FAX-CSRC instruction when
FASX-CSRC is not allowed.
R83 Host command error.
R84 NVRAM writing error.
Note
• When a code other than the ones listed above is displayed, see the FK-502 Service Manual.
Error
Error
10. SERVICE MODE
Solution
• Wait for a while and try
transmitting again.
• Wait for a while and try
transmitting again.
• Wait for a while and try
transmitting again.
Solution
• Check the telephone
number set for host.
• Check the status of the
Machine registration on host
side.
• Wait for a while and try
transmitting again.
• Check the status of the
Machine registration on host
side.
• Contact KONICA MINOLTA
and inform the error code.
• Contact KONICA MINOLTA
and inform the error code.
267