Paper Holding Paddle Drive Clutch Assy - Konica Minolta BIZHUB 501 Service Manual

Field Service Ver.1.0 May. 2008
3.3.14

Paper Holding Paddle Drive Clutch Assy

[1]
[2]
[4]
B. Note to reinstallation Procedure of the Paper Holding Paddle Drive Clutch Assy
1. Insert the Paper Holding Paddle Drive Clutch Assy [1].
NOTE
• When inserting the Paper Holding Paddle Drive Clutch Assy [1] into the shaft, move
the Paper Holding Paddle [4] at the specified position [3], and be sure to install the
edge [5] of Actuator in the position as shown in the drawing.
[4]
[3]
[2]
[1] Paper Holding Paddle Drive Clutch Assy
[2] Front side view
[3] 107 ± 3mm
A. Removal Procedure
1. Remove the Lift Tray.
2. Remove the Conveyance Unit.
3. Remove the Conveyance Upper Cover.
4. Remove the C-ring [1].
4349f2c029na
5. Remove the bearing [2].
6. Loosen two hexagonal socket head
[3]
7. Reinstall the above parts following the
4349f2c030na
[5]
[6]
[4] Paper Holding Paddle
[5] Edge of Actuator
[6] Solenoid Flapper
(See P.13)
(See P.13)
(See P.9)
screws [3], and remove the Paper Hold-
ing Paddle Drive Clutch Assy [4].
removal steps in reverse.
[1]
3. OTHER
[4]
4349f2c032nb
17