Konica Minolta BIZHUB 501 Service Manual page 621

3. OTHER
[2a]
[2]
[4a]
[3]
[5] [6]
[7]
18
2. Install the bearing [2] and the C-ring
[2a].
4349f2c033nb
3. Hook the Solenoid Flapper [4] to the
claw [3] of the Paper Holding Paddle
Drive Clutch Assy.
NOTE
• Install the Paper Holding Paddle Drive
Clutch Assy with the side having a
wider spacing between the claws fac-
[4]
ing upward.
4349f2c034nb
• When hooking the Solenoid Flapper
[4], make sure that the edge of Actua-
tor [4a] is vertical.
4. Adjust the spacing [7] between the
bushing [5] and the Paper Holding Pad-
dle Drive Clutch Assy [6] to 0.2 mm and
tighten two hexagonal socket head
screws.
4349f2c035na
Field Service Ver.1.0 May. 2008