Konica Minolta BIZHUB 501 Service Manual page 358

Field Service Ver.2.0 Mar. 2009
G. Vendor 2
• To set whether or not the vendor 2 is installed.
Functions
• Set when the vendor 2 is mounted.
Use
NOTE
• When using the vendor along with the key counter, inserting the key counter
will set it to the "Key Counter Mode" and removing it will set it to the "Ven-
dor Mode".
• Select color mode and message of key counter.
Setting/
(Only for key counter, the type of the color mode and message are same after
Procedure
mounting.)
✽ Confirmation copy
• Set whether to allow a confirmation copy when a key counter is installed.
• The default setting is Ban.
✽ The next job reservation
• Set whether to allow the reservation of the next job when a key counter is installed.
• The default setting is Ban.
• Select message of vendor.
✽ Message
Type 1: Message for key counter
Type 2: Message for card scanning
Type 3: Message for ID management
NOTE
• The setting is available only when user authentication and account track are
set "OFF" with [Administrator Settings] → [User Authentication/Account
Track] → [General Setting].
License
License
10. SERVICE MODE
"Ban"
"Ban"
321
1