Konica Minolta BIZHUB 501 Service Manual page 261

Hide thumbs Also See for BIZHUB 501:

Table of Contents

10. SERVICE MODE

Tray lift motor initial operation

Shutter close/open operation once

Release/press operation of exit roller

Open/close operation once of paper

exit opening (SD)

After 2-staple positioning, home posi-

Folding once (SD)

Exit motor (1 second ON), stacker

paddle solenoid ON/OFF

Exit motor (1 second ON), exit paddle

solenoid ON/OFF

Punching once (PU)

Switching the number of punches

Field Service Ver.2.0 Mar. 2009

Restrictive conditions

After the tray goes down, it goes up

when the lower limit sensor (PS14)

turns ON and it stops when PS15

turns ON. It becomes valid after exe-

cuting the load check 70-5.

At the same time, the paper exit roller

release/pressure operation is made

by the paper exit roller release motor

Chapters

Table of Contents

Bizhub 361 Bizhub 421