Konica Minolta BIZHUB 501 Service Manual page 128

Field Service Ver.2.0 Mar. 2009
B. Procedure
[7] [8]
[1]
[2]
[9]
[6] [5]
[4]
[3]
50gaf2c099na
1.
Remove the fusing unit.
(See P.79)
2. Remove the fusing claw assy from the fusing unit.
(See P.81)
3.
Remove the fusing web from the fusing unit.
(See P.84)
4. Remove the fusing casing.
(See P.86)
5.
Remove the fusing heater lamps /1 (L2) and /2
(L3).
(See P.88)
6.
Remove the 2 screws [1] and then remove the
lamp fixing plate /Rr [2].
7.
Remove the 2 screws [3] and then remove the
fusing input gear assy [4].
Note
• When installing the fusing input gear assy, be
sure to set the D cut section [6] of the shaft
[5] to the D cut hole [8] of the frame [7].
8.
Release the 2 envelope levers [9].
Note
• Be sure to release the envelope lever up to
the limit.
3. PERIODIC CHECK
91
1