Konica Minolta BIZHUB 501 Service Manual page 402

Field Service Ver.2.0 Mar. 2009
Classification Code
System C-E0AA*
control
commu-
nication
abnor-
mality
C-E0AB*
C-E0AC*
C-E0AD*
C-E0AE*
C-E0AF*
C-E0B0*
C-E0B1
IGC C-FA50
control
C-FA51
error
*1 NVRAM board (NRB) error code display priority
When two or more error codes related to NRB occur at the same time, a code with the highest prece-
dence is displayed according to the priorities shown below.
1. C-C287 → 2. C-C288 → 3. C-C286 → 4. C-C284 → 5. C-C285
Causes
Unrecoverable error (The count is
made by C-5402.)
An abnormal operation occurs
when an interrupt copy is made
(copy scan user job).
Unrecoverable error (The count is
made by C-5402.)
An abnormal operation occurs
when an interrupt copy is made
(copy mixed original scan job 0).
Unrecoverable error (The count is
made by C-5402.)
An abnormal operation occurs
when an interrupt copy is made
(copy z-folding scan job 0).
Unrecoverable error (The count is
made by C-5402.)
An abnormal operation occurs
when an interrupt copy is made
(copy normal scan job 0).
Unrecoverable error (The count is
made by C-5402.)
An abnormal operation occurs
when an interrupt copy is made
(copy scan job 1).
Unrecoverable error (The count is
made by C-5402.)
A SUSPEND occurs.
Unrecoverable error (The count is
made by C-5402.)
An EXCEPTION occurs.
Unrecoverable error (The count is
made by C-5402.)
Putting Job parameter error.
DB error
IGC inside error
13. MALFUNCTION CODE
Resulting Estimated abnormal parts
operation
Engine section Overall control board (OACB)
power OFF.
365
1