Konica Minolta BIZHUB 501 Service Manual page 151

Hide thumbs Also See for BIZHUB 501:
Table of Contents

Advertisement

5. FIRMWARE VERSION UP
C. Forwarding Access Setting
To make the access setting for the Program Server which stores the Firmware data.
1.
Select [Internet ISW] which is available from [Service Mode] → [System 2].
2.
Press [Forwarding Access Setting].
3.
Select [User ID], and enter the user ID which is necessary for connecting to the Program Server on the on-
screen keyboard, and press [END].
4.
Select [Password], and enter the Password which is necessary for connecting to the Program Server on the
on-screen keyboard, and press [END].
5.
Select [URL], and enter the directory which stores the Program Server Address and the Firmware on the on-
screen keyboard by URL method, and press [END].
Note
• Enter the URL which matches to the Protocol to be used.
When connecting to http
When connecting to ftp
6.
Select [File Name], and enter the file name of the Firmware data to be downloaded on the on-screen key-
board, and press [END].
7.
Press [END] to finish setting.
114
http://(host name or IP address)/directory name
or https://(host name or IP address)/directory name
ftp://(host name or IP address)/directory name
Field Service Ver.2.0 Mar. 2009
a0r5f2e004ca

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 361Bizhub 421

Table of Contents