Konica Minolta BIZHUB 501 Service Manual page 295

10. SERVICE MODE
C. Detail Setting
(1) Basic Setting
Functions • Execute the basic setting.
Use • Use to change the set contents.
• Use to register the machine to the CS Remote Care Center.
1.
Setting/ Call the Service Mode to the screen.
2.
Procedure Press [CS Remote Care].
3.
Touching the [Detail Setting] will display the basic setting.
Basic Setting
• Set the Center ID and the phone No.
• When e-mail is selected for system and all setup procedures are completed, E-mail
address of the Center is displayed.
* When entering the phone No, 10-Keys and keys on the screen have following meanings.
[–] Pose
[W] Wait
[T] Tone dial
[P] Pulse dial
[*], [#]
<Schedule (Only when the [E-Mail2] is selected)>
• Set the schedule of notification to the center.
• Up to three different notification schedules can be registered.
• Select the notification cycle from [Day], [Week], or [Month].
When selecting [Day] for the notification cycle, set the Day Frequency.
When selecting [Week] for the notification cycle, set the Week Frequency and day of the
week.
When selecting [Month], set the Month Frequency and the date of the month.
<Center Notification (Only when the [E-Mail2] is selected)>
• Select the items of data that will be sent to the center in one-way transmission through E-
Mail2.
• The following table shows each of the notification item keys and corresponding data.
[1]
[2]
[3]
[4]
[5]
[6]
NOTE
• Multiple items of data can be selected and sent at one time. However, be sure
that only EKC data cannot be sent together with other items of data.
Initial Transmission
• Touching the Initial Transmission key will sent the information to the CS Remote Care
Center to register the machine.
(Only when the Modem or Fax is selected on the system Input.)
258
: Waits to start transmitting after dialing
: Detects the dial tone of the other end
: Carry out tone dialing
: Carry out pulse dialing
: To be used as necessary
Sales count data
Error count data
Service count data
Life count data
Life cycle data
CSRC-System data
Device config data
History data
Field Service Ver.2.0 Mar. 2009
[7] EKC data
[8] Adjustment data
[9] Not used
[10] Not used
[11] Not used
[12] Not used