Konica Minolta BIZHUB 501 Service Manual page 359

10. SERVICE MODE
Note
• Performing the setup for each unit to be mounted will internally change the setting values below. It
needs resetting when cancelling the setting in order to set back to "not mounted" because the
setting value will remain.
Setting Item
Default Copy
Settings
Default
Scan/Fax
Settings
Copy Oper-
ating Screen
Fax Active
Screen
Scan/Fax
Settings
Default Tab
Left Panel
Display
Default
Each Func-
tion Setting
(When IC-
207 is not
mounted)
Each Func-
tion Setting
(When IC-
207 is
mounted)
Administra-
tor Security
Level
Weekly
Timer ON/
OFF Setting
Restrict
Access to
Job Settings
322
Vendor 2 Authentication
Device 1
Factory Default
Factory Default
[Yes]
Rx Display [Yes]
Direct Input
⎯
[Job List]
Copy, PC Copy, PC
print, Send print, Send
Data, and Data, and
Print others Print others
will be set to will be set to
"ON". "ON".
Send Data will be set to "ON".
Prohibit
OFF
⎯
Changing Job Priority, Delet-
ing Other User's Jobs, Regis-
tering and Changing
Addresses, Changing Zoom
Ratio will be set to "Restrict".
Field Service Ver.2.0 Mar. 2009
Key Counter Management
Device 1
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
Copy will be
set to "ON".
PC print,
Send Data,
⎯
and Print
others will be
set to "OFF".
⎯ ⎯
⎯ ⎯
⎯ ⎯
Management
Device 2
⎯
⎯
⎯
⎯
⎯
⎯
Copy, PC
print, Send
Data, and
Print others
will be set to
"ON".
⎯
⎯
⎯