Konica Minolta BIZHUB 501 Service Manual page 690

Field Service Ver.1.0 May. 2008
[25]
[26]
[28] [30]
[24]
[27]
[29] [28]
a0phf2c012ca
8. Remove the C-ring [24] and remove the
gear [25].
NOTE
• Install the gear [25] so that the marks
[26] of gear are aligned to the position
shown in the left figure.
9. Remove two C-rings [27] and then
remove the two gears [28].
NOTE
• Install the gears [28] so that the mark
[29] of Folding Roller /Rt comes half
tooth above the mark [30] of Folding
Roller /Lt.
3. OTHER
21