Konica Minolta BIZHUB 501 Service Manual page 155

5. FIRMWARE VERSION UP
(2) Failing to update the Firmware due to the Network trouble
1.
When updating failed to complete due to the trouble on connecting to the network, an error code and the
message is displayed.
2.
The main body is automatically rebooted and displays the result screen, then press [OK]. It can be used with
the Firmware Version before conducting updating.
3. Check the settings for the network by error codes, and try updating again.
Note
• For error codes, refer to
(3) Failing to update the Firmware after downloading has started
1.
Once Firmware updating has started, the ROM in the main body is deleted.
When it failed right after updating has started, restart the main body, and shift to the standby screen to retry
downloading.
2.
When updating on the control panel, press [settings] on the standby screen, and check the Network settings
again.
Press [Download], and restart the Internet ISW.
Note
• Return to the standby screen without fail after turning the Main power OFF/ON if the Firmware is
not updated.
D. Confirming the Firmware Version
1.
Call the Service Mode to the screen.
2.
Select the [Firmware Version].
3.
Check if the Firmware Version is updated.
118
"5.3.5 Error Code List for the Internet
Field Service Ver.2.0 Mar. 2009
ISW".
a0r5f2e009ca