Konica Minolta BIZHUB 501 Service Manual page 161

5. FIRMWARE VERSION UP
B. Connect Proxy
Functions • To set whether or not to access the Server via Proxy Server.
Use • To use when accessing the Server via Proxy Server.
Setting/ • The default setting is "OFF".
Procedure
C. Proxy Server
Functions • To set the Address and the Port No. of the Proxy Server.
Use • To use when accessing the Server via Proxy Server.
Setting/ <Server Address>
Procedure • Enter the IP Address using the Version 4 method / Version 6 method or FQDN
method.
<Port Number>
• Enter the value between 1 and 65535 using the 10-key pad.
D. Connection Setting
Functions • To set the Port No. and the time for Timeout when accessing the FTP Server, and
also to set whether or not to enable PASV Mode.
Use • To use when accessing the FTP Server.
• To use when connecting by the PASV (passive) Mode (FTP Server side will inform the
connection port before connecting).
Setting/ <Port Number>
Procedure • Enter the value between 1 and 65535 using the 10-key pad.
<Connection Time Out>
• Enter the value between 1 and 60 (min.) using the 10-key pad.
<PASV Mode>
• The default setting is "OFF".
124
ON
ON
Field Service Ver.2.0 Mar. 2009
"OFF"
"OFF"