Table of Contents
Advertisement
90 Configuring the domain
Table 4
Configuring domain parameters
/cfg/domain <domain ID>
followed by:
name<name>
pvips <IPaddr>
aaa
location
patchlink
server
Copyright © 2007, 2008 Nortel Networks
.
Names or renames the domain.
•
The name is a mnemonic aid only and is not
used by other functions.
Sets the pVIP for the domain. The pVIP is the
portal address to which clients connect in order
to access the Nortel SNAS network. For more
information, see
(page
A domain can have more than one pVIP. To
configure multiple IP addresses for the portal,
use a comma to separate the IP address
entries.
Accesses the AAA menu, in order to configure
authentication, authorization, and accounting
features.
•
•
•
Accesses the Location menu for the location
based security. (see
(page
Accesses the PatchLink Servers menu. (see
"Configuring Lumension PatchLink integration
" (page
Accesses the Server menu, in order
to configure the portal SSL server (see
"Configuring the SSL server" (page
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
name is a string that must be unique in the
domain. The maximum length of the string
is 255 characters.
"About the IP addresses"
42).
For authentication, see
authentication" (page
171).
For authorization, see
and profiles" (page 149)
the Nortel Health Agent check" (page 92)
For accounting, see
"Configuring RADIUS
accounting" (page
110).
"Creation of the location"
123))
124))
"Configuring
"Configuring groups
and
."Configuring
97)).
Advertisement
Table of Contents
