162 Configuring groups and profiles
Table 25
Configuring group 1
cfg/domain #/aaa/group 1/cachepass
Usage
Table 26
Configuring group 1
cfg/domain #/aaa/group 1/syscredent/
User
passwd
prevuser
prevpasswd
actdate
earplush
exprprev
updclients
reset
ena
dis
Configuring client filters
To create and configure a client filter, use the following command:
/cfg/doamin #/aaa/filter <filter ID>
where
filter ID is an integer in the range 1 to 63 that
When you first create the filter, you must enter the filter ID. After you have
created the filter, you can use either the ID or the name to access the filter
for configuration.
When you first create the filter, you are prompted to enter the client filter
name.
The Client Filter menu appears.
Copyright © 2007, 2008 Nortel Networks
.
cachepass : true|false
Set the system username.
Set the system password.
Set the systems previous username.
Systems previous password.
New password effective date.
uniquely identifies the filter in the Nortel
SNAS domain.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008