Before You Begin; Text Conventions - Nortel 325 series Cli Manual

18 Introduction
and syntax of each CLI command are described in the document. For
information on accessing the CLI, see
(page
BBI is a graphical user interface (GUI) that runs in an online, interactive
mode. BBI allows the management of multiple devices (for example, the
Nortel SNAS) from one application. For information about using BBI to
configure and manage Nortel SNAS, see Nortel Secure Network Access
Switch Configuration — Using the BBI, (NN47230-500).

Before you begin

This guide is intended for network administrators who have the following
background:
•
•
•
•
Before using this guide, you must complete the following procedures. For
a new switch:
Step
1
2
Ensure that you are running the latest version of Nortel SNAS software.
For information about upgrading the Nortel SNAS, see
reinstalling the software" (page

Text conventions

This guide uses the following text conventions:
Copyright © 2007, 2008 Nortel Networks
.
377).
basic knowledge of networks, Ethernet bridging, and IP routing
familiarity with networking concepts and terminology
experience with windowing systems or GUIs
basic knowledge of network topologies
Action
Install the switch.
For installation instructions, see Nortel Secure Network Access
Switch 4050 Installation Guide , (NN47230-300).
Connect the switch to the network.
For more information, see
377).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
"The Command Line Interface"
"The Command Line Interface" (page
--End--
367).
"Upgrading or