Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

Table 24
Configuring groups (cont'd.)
/cfg/doamin #/aaa/group #
followed by:
comment <comment>
del
Figure 5 "Group menu commands" (page 161)
the /cfg/doamin #/aaa/group <group ID> command and commands
on the Group menu.
Figure 5
Group menu commands
Copyright © 2007, 2008 Nortel Networks
.
Configuring groups and extended profiles 161
User access to the network is denied when the
administrative rights parameter is active and the
username/password configuration is invalid.
Use reset to remove the admrights username
and password; that is, as if they had never been
configured.
Sets a comment for the group.
Removes the group from the Nortel SNAS
domain. When you delete the group, you also
delete all extended profiles associated with that
group ID.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
shows sample output for