Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

72 Managing the network access devices
/cfg/domain #/switch #/sshkey
The SSH Key menu appears.
The SSH Key menu includes the following options:
/cfg/domain #/switch #/sshkey
followed by:
import
add
del
show
export
user <user>
Reimporting the network access devices SSH key
Whenever the network access devices generates a new public SSH key,
you must import the new key into the Nortel SNAS domain.
Copyright © 2007, 2008 Nortel Networks
.
Retrieves the SSH public key from the network
access devices, if it is reachable.
Allows you to paste in the contents of a key
file you have downloaded from the Ethernet
Routing Switch 8300 network access devices.
When prompted, paste in the key, then press
Enter. Enter an elllipsis (...) to signal the end
of the key.
Deletes the SSH public key for the network
access devices in the domain.
The SSH public key type and fingerprint for the
network access devices.
Exports the SSH public key for the Nortel
SNAS domain to the network access devices.
ATTENTION
You cannot use this command to export
the key to an Ethernet Routing Switch
5500 series switch. Instead, use the
/cfg/domain#1/sshkey/export
command to upload the key to a file
exchange server.
Specifies the user name for the network
access devices (required for Ethernet Routing
Switch 8300 only).
•

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
user is the user name of an administrative
user (rwa) on the switch.