Table of Contents
Advertisement
Configuring the Nortel SNAS scheduler
The Nortel SNAS scheduler allows to run automated system maintenance
tasks at scheduled intervals. To configure the Scheduler tasks, use the
following command:
/cfg/scheduler
The Scheduler menu appears.
The Scheduler menu includes the following options:
/cfg/scheduler
followed by:
add
del <task number>
list
ena
dis
Addition of a scheduled task
To add a scheduled task, use the following command:
/cfg/scheduler/add
This includes the following fields:
/cfg/scheduler/add
followed by:
task
day of week
Copyright © 2007, 2008 Nortel Networks
.
Adds task to the scheduler.
Deletes task from scheduler.
•
task number—specify the task number.
Lists schedule time details for the following:
•
Id
•
Task
•
Scheduled Time
•
Comments
Enables the scheduler task.
Disables the scheduler task.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Managing and maintaining the system 359
Specifies the scheduled task. Values:
ptcfg | reboot | starttrace | stoptrace |
selftest | upgrade | export
Select the day of the week. You can select
the multiple days in a week. The value
ranges from 0 to 6.(Sunday = 0) and [*]:
1-5
Advertisement
Table of Contents
