84 Configuring the domain
Figure 4
Creating a domain
Using the Nortel SNAS domain quick setup wizard in the CLI
To create a domain using the Nortel SNAS quick setup wizard, use the
following command:
/cfg/quick
The NSNAS quick setup wizard is similar to the quick setup wizard
available during initial setup.
Depending on the options you select in connection with certificates and
creating a test user, the two wizards also create similar default settings
(see
You can later modify all settings created by the domain quick setup wizard
(see
Copyright © 2007, 2008 Nortel Networks
.
"Settings created by the quick setup wizard" (page
"Configuring domain parameters" (page
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
49)).
89)).