Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

190 Configuring authentication
To modify settings for the specific LDAP configuration, use the following
command:
/cfg/doamin #/aaa/auth #/ldap
The LDAP menu appears.
The LDAP menu includes the following options:
Table 37
Configuring LDAP settings
/cfg/doamin #/aaa/auth #/ldap
followed by:
servers
searchbase
groupattr <names>
userattr <names>
Copyright © 2007, 2008 Nortel Networks
.
Accesses the LDAP servers menu, in
order to manage the external LDAP servers
configured for the domain (see
LDAP authentication servers" (page
Sets the search base entry.
Specifies the LDAP attribute that contains
the names of the groups. The group names
contained in the LDAP attribute must be
defined in the Nortel SNAS domain (see
"Configuring groups" (page
To specify more than one group attribute
name, enter the names separated by a comma
(,).
Refers to one of the following:
1. the LDAP attribute that contains the user
2. if the client's portal logon name is different

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
name used for authenticating a client in the
domain
The default user attribute name is uid.
Do not use the isdbinddn and
isdbindpas commands.
from the RDN (for example, when using
LDAP for authentication towards Active
Directory), the LDAP attribute that is used
in combination with the client's logon name
to search the DIT
For example, a user record in Active
Directory is defined as the following
DN: cn=Bill Smith, ou=Users,
dc=example, dc=com. The user
record also contains the attribute
sAMAccountName=bill. The user's
"Managing
193)).
156)).