Table of Contents
Advertisement
326 Configuring SNMP
/cfg/sys/adm/snmp
followed by:
versions <v1|v2c|v3>
snmpv2-mib
community
users
target
event
Configuring the SNMP v2 MIB
To configure parameters in the standard SNMPv2 MIB, use the following
command:
/cfg/sys/adm/snmp/snmpv2-mib
The SNMPv2-MIB menu appears.
The SNMPv2-MIB menu includes the following options:
Copyright © 2007, 2008 Nortel Networks
.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Specifies the SNMP versions allowed.
Enter one or more of the following options:
•
v1—SNMP version 1
•
v2c—SNMP version 2c
•
v3—SNMP version 3
To configure support for multiple versions,
use a comma to separate the entries.
The default is all versions (v1, v2c, v3).
Accesses the SNMPv2-MIB menu, in
order to configure parameters in the
standard SNMP v2 MIB for the system
(see
"Configuring the SNMP v2 MIB" (page
326)).
Accesses the SNMP Community menu, in
order to configure the community aspects
of SNMP monitoring (see
SNMP community" (page
Accesses the SNMP User menu, in
order to manage SNMPv3 users (see
"Configuring SNMPv3 users" (page
Accesses the Notification Target menu,
in order to configure the notification
target aspects of SNMP monitoring (see
"Configuring SNMP notification targets"
(page
331)).
Accesses the Event menu, in order to
create custom monitoring definitions for
the objects in the DISMAN-EVENT-MIB
(see
"Configuring SNMP notification
targets" (page
331)).
"Configuring the
327)).
328)).
Advertisement
Table of Contents
